Drill Service logo
Drill Service

DCSPADEG - Carbide Drill, Spade Type, for Glass

DCSPADEG - Carbide Drill, Spade Type, for GlassFor cutting glass and ceramics. The sharp point helps to reduce chipping at breakthrough. Must be run very slow. For drilling glass flood with turpentine. Point angle 60 degrees. Size range available from 1.000mm to 12.700mm.

Click on part number to check stock

Print Friendly Page

Part No.

DescriptionO/A LengthPoint Angle Price Qty Add More
DCSPADEG-1.00 1.00mm38.060 £8.74
DCSPADEG-1.50 1.50mm38.060 £8.74
DCSPADEG-2.00 2.00mm38.060 £8.74
DCSPADEG-3/32 2.381mm38.060 £8.74
DCSPADEG-1/8 3.175mm38.060 £8.74
DCSPADEG-5/32 3.969mm38.060 £8.74
DCSPADEG-3/16 4.763mm38.060 £10.28
DCSPADEG-5.00 5.00mm50.060 £13.28
DCSPADEG-7/32 5.556mm51.060 £13.01
DCSPADEG-6.00 6.00mm50.060 £14.19
DCSPADEG-1/4 6.35mm51.060 £14.96
DCSPADEG-7.00 7.00mm50.060 £17.26
DCSPADEG-9/32 7.144mm51.060 £20.94
DCSPADEG-5/16 7.938mm51.060 £18.66
DCSPADEG-8.00 8.00mm55.060 £22.88
DCSPADEG-11/32 8.731mm63.060 £22.74
DCSPADEG-3/8 9.525mm63.060 £24.29
DCSPADEG-10.00 10.00mm55.060 £35.97
DCSPADEG-13/32 10.319mm63.060 £26.97
DCSPADEG-11.00 11.00mm55.060 £44.00
DCSPADEG-7/16 11.113mm63.060 £28.64
DCSPADEG-15/32 11.906mm63.060 £34.15
DCSPADEG-12.00 12.00mm55.060 £47.85
DCSPADEG-1/2 12.70mm63.060 £35.78
Click on part number to check stock