Drill Service logo
Drill Service

DCSPADE - Carbide Drill, Spade Type, for Metals

DCSPADE - Carbide Drill, Spade Type, for MetalsThis drill is for use on very hard metals that require a stronger cutting edge than that provided by conventional rake angles. Suitable for drilling HSS, Stellite and hard alloys. Run slow with constant feed. If using coolant, keep a constant flow. Point angle 118 degrees. Size range available from 1.000mm to 1/2".

Click on part number to check stock

Print Friendly Page

Part No.

DescriptionFlute LengthO/A LengthPoint Angle Price Qty Add Info
DCSPADE-1.00 1.00mm38.0118 £8.74
DCSPADE-1.50 1.50mm38.0118 £8.74
DCSPADE-1/16 1.588mm9.538.0118 £11.47
DCSPADE-2.00 2.00mm38.0118 £8.74
DCSPADE-3/32 2.381mm38.0118 £8.74
DCSPADE-3.00 3.00mm38.0118 £11.46
DCSPADE-1/8 3.175mm38.0118 £8.74
DCSPADE-5/32 3.969mm38.0118 £8.74
DCSPADE-4.00 4.00mm50.0118 £12.09
DCSPADE-3/16 4.763mm38.0118 £10.31
DCSPADE-5.00 5.00mm50.0118 £11.73
DCSPADE-7/32 5.556mm51.0118 £13.01
DCSPADE-1/4 6.35mm51.0118 £14.96
DCSPADE-7.00 7.00mm50.0118 £17.26
DCSPADE-9/32 7.144mm51.0118 £18.97
DCSPADE-5/16 7.938mm51.0118 £19.99
DCSPADE-8.00 8.00mm55.0118 £22.88
DCSPADE-11/32 8.731mm63.0118 £22.74
DCSPADE-9.00 9.00mm55.0118 £32.64
DCSPADE-3/8 9.525mm63.0118 £24.29
DCSPADE-10.00 10.00mm55.0118 £35.97
DCSPADE-13/32 10.319mm63.0118 £26.97
DCSPADE-11.00 11.00mm55.0118 £44.00
DCSPADE-7/16 11.113mm63.0118 £28.64
DCSPADE-15/32 11.906mm63.0118 £34.15
DCSPADE-12.00 12.00mm55.0118 £47.85
DCSPADE-1/2 12.70mm63.0118 £39.46
Click on part number to check stock