Drill Service logo
Drill Service

DCOMP - Carbide Drill, Sickle Point for Composites

DCOMP - Carbide Drill, Sickle Point for CompositesMade with a trepanning point these drills are suitable for drilling Kevlar and other composites reinforced with carbon, aramid or glass fibres. The helix angle is 30 degrees. Size range available from 3.000mm to 16.000mm.

Click on part number to check stock

Print Friendly Page

Part No.

DescriptionFlute LengthO/A Length Price Qty Add More
DCOMP-3.00 3.00mm33.061.0 £28.90
DCOMP-1/8 3.175mm32.057.0 £34.26
DCOMP-3.50 3.50mm39.070.0 £29.84
DCOMP-4.00 4.00mm43.075.0 £32.44
DCOMP-4.25 4.25mm41.070.0 £32.98
DCOMP-4.50 4.50mm47.080.0 £33.84
DCOMP-3/16 4.763mm41.070.0 £34.51
DCOMP-5.00 5.00mm52.086.0 £36.00
DCOMP-5.50 5.50mm57.093.0 £38.95
DCOMP-6.00 6.00mm57.093.0 £41.14
DCOMP-1/4 6.35mm51.082.0 £42.83
DCOMP-6.50 6.50mm63.0101.0 £45.43
DCOMP-7.00 7.00mm69.0109.0 £47.28
DCOMP-7.50 7.50mm69.0109.0 £55.75
DCOMP-8.00 8.00mm75.0117.0 £56.94
DCOMP-8.50 8.50mm75.0117.0 £62.78
DCOMP-9.00 9.00mm75.0117.0 £68.15
DCOMP-3/8 9.525mm70.0108.0 £73.97
DCOMP-10.00 10.00mm87.0133.0 £82.94
DCOMP-10.50 10.50mm87.0133.0 £91.86
DCOMP-11.00 11.00mm73.0114.0 £95.21
DCOMP-11.50 11.50mm76.0121.0 £107.91
DCOMP-12.00 12.00mm101.0151.0 £113.26
DCOMP-12.50 12.50mm76.0121.0 £113.26
DCOMP-1/2 12.70mm76.0121.0 £128.46
DCOMP-13.00 13.00mm82.0127.0 £128.46
DCOMP-14.00 14.00mm82.0127.0 £128.46
DCOMP-15.00 15.00mm82.0127.0 £128.46
DCOMP-16.00 16.00mm58.2127.0 £128.46
Click on part number to check stock