EMCSGLH4 - Carbide Slug End Mill, 4 Flute, Left Hand Helix
REDUCED TO CLEAR - OBSOLETE STOCK
These Screwed Shank End Mills have the braze further from the cutting edge than equivalent tipped cutters. Recommended for profiling. Workpiece is forced away from the cutter onto the worktable. End cuts with negative rake and may give a poor finish. Does not cut across centre. Available in metric and imperial sizes from 3/8" to 2" and 10.00 to 38.00 mm.
Info |
Part No |
Description |
In Stock |
Price |
Qty |
Add |
EMCSGLH4-3/8 |
3/8 Carbide Slug 4Fl. LHH Scr.Shk.EM |
10 |
£20.00 | |||
EMCSGLH4-10.00 |
10.00 Carbide Slug 4Fl. LHH Scr.Shk.EM |
1 |
£20.00 | |||
EMCSGLH4-11.00 |
11.00 Carbide Slug 4Fl. LHH Scr.Shk.EM |
1 |
£20.00 | |||
EMCSGLH4-7/16 |
7/16 Carbide Slug 4Fl. LHH Scr.Shk.EM |
10 |
£20.00 | |||
EMCSGLH4-1/2 |
1/2 Carbide Slug 4Fl. LHH Scr.Shk.EM |
5 |
£20.00 | |||
EMCSGLH4-9/16 |
9/16 Carbide Slug 4Fl. LHH Scr.Shk.EM |
9 |
£20.00 | |||
EMCSGLH4-5/8 |
5/8 Carbide Slug 4Fl. LHH Scr.Shk.EM |
7 |
£20.00 | |||
EMCSGLH4-3/4 |
3/4 Carbide Slug 4Fl. LHH Scr.Shk.EM |
1 |
£20.00 | |||
EMCSGLH4-7/8 |
7/8 Carbide Slug 4Fl. LHH Scr.Shk.EM |
2 |
£20.00 | |||
EMCSGLH4-1 |
1in Carbide Slug 4Fl. LHH Scr.Shk.EM |
5 |
£20.00 | |||
EMCSGLH4-1.1/8 |
1.1/8 Carbide Slug 4Fl. LHH Scr.Shk.EM |
5 |
£20.00 | |||
EMCSGLH4-1.1/4 |
1.1/4 Carbide Slug 4Fl. LHH Scr.Shk.EM |
6 |
£20.00 | |||
EMCSGLH4-1.1/2 |
1.1/2 Carbide Slug 4Fl. LHH Scr.Shk.EM |
5 |
£20.00 |