DCSPADEG - Carbide Drill, Spade Type, for Glass

For cutting glass and ceramics. The sharp point helps to reduce chipping at breakthrough. Must be run very slow. For drilling glass flood with turpentine. Point angle 60 degrees. Size range available from 1.000mm to 12.700mm.

Click on part number to check stock

Print Friendly Page

Part No.	Description	O/A Length	Point Angle	Price	Qty	Add	More
DCSPADEG-1.00	1.00mm	38.0	60	£10.39
DCSPADEG-1.50	1.50mm	38.0	60	£10.42
DCSPADEG-2.00	2.00mm	38.0	60	£10.42
DCSPADEG-3/32	2.381mm	38.0	60	£10.39
DCSPADEG-1/8	3.175mm	38.0	60	£10.39
DCSPADEG-5/32	3.969mm	38.0	60	£10.39
DCSPADEG-3/16	4.763mm	38.0	60	£12.27
DCSPADEG-5.00	5.00mm	50.0	60	£13.28
DCSPADEG-7/32	5.556mm	51.0	60	£15.50
DCSPADEG-6.00	6.00mm	50.0	60	£14.19
DCSPADEG-1/4	6.35mm	51.0	60	£17.82
DCSPADEG-7.00	7.00mm	50.0	60	£17.26
DCSPADEG-9/32	7.144mm	51.0	60	£24.95
DCSPADEG-5/16	7.938mm	51.0	60	£18.66
DCSPADEG-8.00	8.00mm	55.0	60	£22.88
DCSPADEG-11/32	8.731mm	63.0	60	£27.05
DCSPADEG-3/8	9.525mm	63.0	60	£28.93
DCSPADEG-10.00	10.00mm	55.0	60	£35.97
DCSPADEG-13/32	10.319mm	63.0	60	£32.06
DCSPADEG-11.00	11.00mm	55.0	60	£44.00
DCSPADEG-7/16	11.113mm	63.0	60	£34.05
DCSPADEG-15/32	11.906mm	63.0	60	£40.64
DCSPADEG-12.00	12.00mm	55.0	60	£47.85
DCSPADEG-1/2	12.70mm	63.0	60	£42.60