Drill Service (Horley) Ltd
Contact sales on sales@drill-service.co.uk or call +44 (0)1293774911
XCHM - Xebec Cross-Hole Deburring, Alumina Fibre
Ideal for deburring, polishing, and removing cutter marks on inner diameters and counterbores up to Ø20
- The brush size is approximate as the tip expands by rotating.
- The tool can be mounted on an equipment which can control the rotation speed. The tool must be rotated over 8,000 min?¹.
Precautions for use.
The Brush will break off if:
- machined beyond the maximum rotational speed
- used with a pneumatic tool
- rotated outside the cylinder (outside workpiece)
In the following cases, the Brush may break off:
- Off-center cross hole and angled cross hole
- T-shaped hole: If the cross hole diameter is 100% of the main bore diameter or more.
- Cross-shaped hole: If the cross hole diameter is 70% of the main bore diameter or more.
How to use | Manual PDF | How to adjust | Maintenance | Contact us
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||